Home › Code lookup › P0763
Powertrain code · Transmission

P0763 Shift Solenoid C Electrical

How urgent? Get it checked in the next few days

What it means

The computer found an open or shorted circuit in the wiring for shift solenoid C.

Can I keep driving?

Usually drivable with care to a shop soon. With an electrical fault the transmission often holds one gear, so acceleration can be weak or RPM high. Skip the highway if it won't shift. If it slips, bangs into gear or warns of overheating, stop and get it checked.

What to test before replacing parts

Check the solenoid C circuit for opens or shorts and measure its resistance through the connector and internal harness before replacing the solenoid or transmission computer.

  1. Check fluid level and condition
  2. Measure the solenoid resistance through the transmission connector
  3. Command the solenoid on and off with a scanner and watch for a gear change

Signs you may notice

  • Check engine light on
  • Transmission stuck in one gear or skipping gears
  • Harsh, late or erratic shifts
  • Worse fuel economy or high RPM at highway speed

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonDamaged wiring or connector (often the internal harness)
  • CommonFaulty shift solenoid
  • PossibleTransmission computer fault
  • PossibleLow or dirty transmission fluid

Typical repair once the cause is confirmed

Usually a new shift solenoid (on many models sold as a solenoid pack) or a wiring repair; check the fluid first.

Repair costInsufficient verified pricing for this vehicle and repair
Replace shift solenoid C. Prepare an itemized shop request.
Walk through it step by step: Harsh or late shifting →

Common questions

What does P0763 mean?

The computer found an open or shorted circuit in the wiring for shift solenoid C.

Can I drive with code P0763?

Usually drivable with care to a shop soon. With an electrical fault the transmission often holds one gear, so acceleration can be weak or RPM high. Skip the highway if it won't shift. If it slips, bangs into gear or warns of overheating, stop and get it checked.

What causes P0763?

Common possibilities to test include: damaged wiring or connector (often the internal harness); faulty shift solenoid; transmission computer fault; low or dirty transmission fluid. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.