P0765 Shift Solenoid D
What it means
There's a problem with shift solenoid D, one of the electric valves the computer uses to change gears.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check fluid level and condition
- Measure the solenoid resistance through the transmission connector
- Command the solenoid on and off with a scanner and watch for a gear change
Signs you may notice
- Check engine light on
- Transmission stuck in one gear or skipping gears
- Harsh, late or erratic shifts
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty shift solenoid
- CommonDamaged wiring or connector (often the internal harness)
- CommonLow or dirty transmission fluid
Typical repair once the cause is confirmed
Usually a new shift solenoid (on many models sold as a solenoid pack) or a wiring repair; check the fluid first.
Known on these vehicles
Common questions
What does P0765 mean?
There's a problem with shift solenoid D, one of the electric valves the computer uses to change gears.
Can I drive with code P0765?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P0765?
Common possibilities to test include: faulty shift solenoid; damaged wiring or connector (often the internal harness); low or dirty transmission fluid. A shop should confirm the cause before replacing parts.