P0776 Pressure Control Solenoid B Performance or Stuck Off
What it means
The second pressure control solenoid isn't changing pressure the way the computer commands, or seems stuck off, often causing harsh or slipping shifts.
Can I keep driving?
Drive gently and only as needed to get it checked soon. Wrong clutch pressure can cause harsh shifts or slipping, and slipping wears the transmission fast. If it's in limp mode, won't engage a gear, slips or flares in RPM, avoid highways and consider a tow.
What to test before replacing parts
Check fluid level and condition, read live pressure control data on a scanner, and verify line pressure with a gauge before replacing pressure control solenoid B or the valve body.
- Check fluid level and condition
- Measure the solenoid resistance through the transmission connector
- Check line pressure with a gauge if shifting is harsh or soft
Signs you may notice
- Check engine light on
- Harsh or very soft shifts
- Slipping or delayed engagement
- Transmission stuck in limp mode
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty pressure control solenoid
- CommonDamaged wiring or connector (often the internal harness)
- CommonLow or dirty transmission fluid
- PossibleSticking valve in the valve body
- PossibleTransmission computer fault
Typical repair once the cause is confirmed
Usually a new pressure control solenoid (on some models part of the solenoid pack or valve body) or a wiring repair; check the fluid first.
Known on these vehicles
Common questions
What does P0776 mean?
The second pressure control solenoid isn't changing pressure the way the computer commands, or seems stuck off, often causing harsh or slipping shifts.
Can I drive with code P0776?
Drive gently and only as needed to get it checked soon. Wrong clutch pressure can cause harsh shifts or slipping, and slipping wears the transmission fast. If it's in limp mode, won't engage a gear, slips or flares in RPM, avoid highways and consider a tow.
What causes P0776?
Common possibilities to test include: faulty pressure control solenoid; damaged wiring or connector (often the internal harness); low or dirty transmission fluid; sticking valve in the valve body. A shop should confirm the cause before replacing parts.