Home › Code lookup › P077B
Powertrain code · Transmission

P077B Output Speed Sensor Circuit - Direction Error

How urgent? Get it checked in the next few days

What it means

The output speed sensor reports the wheels turning in a direction that doesn't match the gear selected.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect the sensor connector and wiring
  2. Check the output speed and direction reading on a scanner while moving forward and in reverse

Signs you may notice

  • Check engine light on
  • Speedometer may act up
  • Shifting or hill-hold features may misbehave

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty output speed sensor
  • CommonDamaged wiring or connector to the sensor
  • PossibleTransmission computer fault

Typical repair once the cause is confirmed

Usually a new output speed sensor or a wiring repair.

Repair costInsufficient verified pricing for this vehicle and repair
Replace output shaft speed sensor. Prepare an itemized shop request.
Walk through it step by step: Transmission warning light on →

Common questions

What does P077B mean?

The output speed sensor reports the wheels turning in a direction that doesn't match the gear selected.

Can I drive with code P077B?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P077B?

Common possibilities to test include: faulty output speed sensor; damaged wiring or connector to the sensor; transmission computer fault. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.