Home › Code lookup › P0780
Powertrain code · Transmission

P0780 Shift Error

How urgent? Get it checked in the next few days

What it means

The computer commanded a gear change but didn't see the transmission complete it the way it should.

Can I keep driving?

Drive gently and get it checked soon. Missed shifts or RPM flares mean something is slipping or not engaging, which can get worse. If it won't pick up a gear, slips, or goes into limp mode, avoid highways and busy traffic and consider a tow.

What to test before replacing parts

Check fluid level and condition, read all other transmission codes, and use a scanner to see which shift fails and why before replacing solenoids or rebuilding.

  1. Check fluid level and condition
  2. Check for solenoid or speed sensor codes and fix those first
  3. Road test and watch the shift on a scanner

Signs you may notice

  • Check engine light on
  • Harsh, late or missing shift
  • RPM flare during the shift
  • Transmission may go into limp mode

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonLow, burnt or wrong transmission fluid
  • CommonFaulty shift solenoid
  • CommonSticking valve in the valve body
  • PossibleWorn clutches or bands inside the transmission
  • PossibleFaulty speed sensor

Typical repair once the cause is confirmed

Correct the fluid first, then repair the shift solenoid or valve body; internal wear may need a rebuild.

Repair costInsufficient verified pricing for this vehicle and repair
Replace shift solenoid pack or valve body. Prepare an itemized shop request.

Known on these vehicles

Walk through it step by step: Harsh or late shifting →

Common questions

What does P0780 mean?

The computer commanded a gear change but didn't see the transmission complete it the way it should.

Can I drive with code P0780?

Drive gently and get it checked soon. Missed shifts or RPM flares mean something is slipping or not engaging, which can get worse. If it won't pick up a gear, slips, or goes into limp mode, avoid highways and busy traffic and consider a tow.

What causes P0780?

Common possibilities to test include: low, burnt or wrong transmission fluid; faulty shift solenoid; sticking valve in the valve body; worn clutches or bands inside the transmission. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.