Home › Code lookup › P0782
Powertrain code · Transmission

P0782 2-3 Shift

How urgent? Get it checked in the next few days

What it means

The computer saw a problem with the shift between gear 2 and gear 3: it was late, harsh, slipping or didn't happen.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check fluid level and condition
  2. Check for solenoid or speed sensor codes and fix those first

Signs you may notice

  • Check engine light on
  • Harsh, late or missing shift
  • RPM flare during the shift

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonLow, burnt or wrong transmission fluid
  • CommonFaulty shift solenoid
  • CommonSticking valve in the valve body

Typical repair once the cause is confirmed

Correct the fluid first, then repair the shift solenoid or valve body; internal wear may need a rebuild.

Repair costInsufficient verified pricing for this vehicle and repair
Replace shift solenoid pack or valve body. Prepare an itemized shop request.

Known on these vehicles

Walk through it step by step: Harsh or late shifting →

Common questions

What does P0782 mean?

The computer saw a problem with the shift between gear 2 and gear 3: it was late, harsh, slipping or didn't happen.

Can I drive with code P0782?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P0782?

Common possibilities to test include: low, burnt or wrong transmission fluid; faulty shift solenoid; sticking valve in the valve body. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.