P0793 Intermediate Shaft Speed Sensor A Circuit No Signal
What it means
The computer isn't getting any signal from the intermediate shaft speed sensor.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Inspect the sensor connector and wiring
- Watch the intermediate speed reading on a scanner while driving
Signs you may notice
- Check engine light on
- Harsh or erratic shifts
- Transmission may go into limp mode
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty intermediate shaft speed sensor
- CommonDamaged wiring or connector to the sensor
- PossibleMetal debris on the sensor tip
Typical repair once the cause is confirmed
Usually a new intermediate shaft speed sensor or a wiring repair.
Common questions
What does P0793 mean?
The computer isn't getting any signal from the intermediate shaft speed sensor.
Can I drive with code P0793?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P0793?
Common possibilities to test include: faulty intermediate shaft speed sensor; damaged wiring or connector to the sensor; metal debris on the sensor tip. A shop should confirm the cause before replacing parts.