P0796 Pressure Control Solenoid C Performance or Stuck Off
What it means
The third pressure control solenoid isn't changing pressure the way the computer commands, or seems stuck off.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check fluid level and condition
- Measure the solenoid resistance through the transmission connector
Signs you may notice
- Check engine light on
- Harsh or very soft shifts
- Slipping or delayed engagement
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty pressure control solenoid
- CommonDamaged wiring or connector (often the internal harness)
- CommonLow or dirty transmission fluid
- PossibleSticking valve in the valve body
Typical repair once the cause is confirmed
Usually a new pressure control solenoid (on some models part of the solenoid pack or valve body) or a wiring repair; check the fluid first.
Common questions
What does P0796 mean?
The third pressure control solenoid isn't changing pressure the way the computer commands, or seems stuck off.
Can I drive with code P0796?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P0796?
Common possibilities to test include: faulty pressure control solenoid; damaged wiring or connector (often the internal harness); low or dirty transmission fluid; sticking valve in the valve body. A shop should confirm the cause before replacing parts.