Home › Code lookup › P0800
Powertrain code · Transmission

P0800 Transfer Case Control System (MIL Request)

How urgent? Book a check when convenient

What it means

The transfer case control module (the computer that runs four-wheel drive) found a fault and asked the engine computer to turn on the check engine light.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Scan the transfer case module for its own codes, which point to the real problem
  2. Check the transfer case shift motor connector for corrosion

Signs you may notice

  • Check engine light on
  • 4WD may not engage or may be stuck in one mode
  • 4WD indicator may flash

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFault stored in the transfer case control module
  • CommonTransfer case shift motor or position sensor problem
  • PossibleWiring or connector fault at the transfer case
  • PossibleLow battery voltage

Typical repair once the cause is confirmed

Fix the fault stored in the transfer case module; this code clears once that problem is repaired.

Walk through it step by step: 4WD or AWD not engaging →

Common questions

What does P0800 mean?

The transfer case control module (the computer that runs four-wheel drive) found a fault and asked the engine computer to turn on the check engine light.

Can I drive with code P0800?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0800?

Common possibilities to test include: fault stored in the transfer case control module; transfer case shift motor or position sensor problem; wiring or connector fault at the transfer case; low battery voltage. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.