Home › Code lookup › P0808
Powertrain code · Transmission

P0808 Clutch Position Sensor Circuit High

How urgent? Book a check when convenient

What it means

The computer sees a signal or voltage in the clutch position sensor circuit that is higher than it should be. The clutch position sensor tells the computer how far the clutch pedal is pressed, or how far an automated clutch is engaged.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check the connector for pushed-out or loose pins
  2. Check the clutch position sensor circuit for an open wire or a short to voltage
  3. Test the clutch position sensor against the factory specification

Signs you may notice

  • Check engine light on
  • Engine may not crank, or cruise control may not work
  • Jerky clutch engagement on automated manual transmissions

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonOpen or broken wire in the clutch position sensor circuit
  • CommonFailed clutch position sensor
  • PossibleWire shorted to another power circuit
  • PossiblePoor ground or loose connector
  • PossibleFaulty control module (rare)

Typical repair once the cause is confirmed

Repair the open or shorted wire or bad connector; if the wiring is good, replace the clutch position sensor.

Repair costInsufficient verified pricing for this vehicle and repair
Replace clutch position sensor. Prepare an itemized shop request.

Common questions

What does P0808 mean?

The computer sees a signal or voltage in the clutch position sensor circuit that is higher than it should be. The clutch position sensor tells the computer how far the clutch pedal is pressed, or how far an automated clutch is engaged.

Can I drive with code P0808?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0808?

Common possibilities to test include: open or broken wire in the clutch position sensor circuit; failed clutch position sensor; wire shorted to another power circuit; poor ground or loose connector. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.