Home › Code lookup › P080A
Powertrain code · Transmission

P080A Clutch Position Not Learned

How urgent? Book a check when convenient

What it means

The computer has not yet learned the clutch engagement point, which it needs to control starting, cruise or an automated clutch correctly.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Run the clutch position learn procedure with a scan tool
  2. Check the clutch position sensor reading and adjustment

Signs you may notice

  • Check engine light on
  • Engine may not crank, or clutch engagement may feel off
  • Cruise control may not work

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonClutch position relearn not done after a clutch, sensor or module replacement
  • PossibleBattery was disconnected or went dead
  • PossibleFailing clutch position sensor

Typical repair once the cause is confirmed

Perform the clutch position relearn with a capable scan tool; replace the sensor only if it will not learn.

Common questions

What does P080A mean?

The computer has not yet learned the clutch engagement point, which it needs to control starting, cruise or an automated clutch correctly.

Can I drive with code P080A?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P080A?

Common possibilities to test include: clutch position relearn not done after a clutch, sensor or module replacement; battery was disconnected or went dead; failing clutch position sensor. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.