P0803 1-4 Upshift (Skip Shift) Solenoid Control Circuit
What it means
On some manual transmissions, a solenoid forces a shift from 1st straight to 4th during light driving to save fuel. The computer found an electrical problem in that solenoid circuit.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Inspect the solenoid connector on the transmission
- Test the solenoid resistance and its power supply
Signs you may notice
- Check engine light on
- Skip shift may stop working, or shifter may block 2nd gear unexpectedly
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailed skip shift solenoid
- CommonDamaged wiring or connector at the solenoid
- PossibleFaulty engine computer (rare)
Typical repair once the cause is confirmed
Repair the wiring or replace the skip shift solenoid.
Where it shows up
- Known on manual-transmission Chevrolet Corvette and Camaro models with the 1-to-4 skip shift feature
Common questions
What does P0803 mean?
On some manual transmissions, a solenoid forces a shift from 1st straight to 4th during light driving to save fuel. The computer found an electrical problem in that solenoid circuit.
Can I drive with code P0803?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P0803?
Common possibilities to test include: failed skip shift solenoid; damaged wiring or connector at the solenoid; faulty engine computer (rare). A shop should confirm the cause before replacing parts.