Home › Code lookup › P0801
Powertrain code · Transmission

P0801 Reverse Inhibit Control Circuit

How urgent? Book a check when convenient

What it means

There is an electrical problem in the circuit that blocks reverse gear when the car is moving forward. This is mostly found on some manual transmissions.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect the solenoid connector on the side of the transmission
  2. Test the solenoid resistance and its power supply

Signs you may notice

  • Check engine light on
  • Reverse may be hard or impossible to select
  • Or reverse may not be blocked while moving

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailed reverse lockout solenoid
  • CommonDamaged wiring or connector at the solenoid
  • PossibleBlown fuse
  • PossibleFaulty engine computer (rare)

Typical repair once the cause is confirmed

Repair the wiring or replace the reverse lockout solenoid.

Walk through it step by step: Car won't go into gear →

Common questions

What does P0801 mean?

There is an electrical problem in the circuit that blocks reverse gear when the car is moving forward. This is mostly found on some manual transmissions.

Can I drive with code P0801?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0801?

Common possibilities to test include: failed reverse lockout solenoid; damaged wiring or connector at the solenoid; blown fuse; faulty engine computer (rare). A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.