Home › Code lookup › P0915
Powertrain code · Transmission

P0915 Gear Shift Position Circuit Range/Performance

How urgent? Get it checked in the next few days

What it means

The gear shift position sensor is giving readings that don't match what the computer expects for the current conditions. The shift position sensor tells an automated manual transmission how far its shift mechanism has moved forward or back into gear.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Compare the shift position sensor reading with what it should be on a scan tool
  2. Inspect the wiring and connector for corrosion or damage

Signs you may notice

  • Transmission warning or check engine light on
  • Gears may be refused, slow or harsh to engage
  • Transmission may go into limp mode

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailing gear shift position sensor
  • PossibleSticking or worn shift mechanism
  • PossibleHigh resistance in the wiring or connector
  • PossibleControl module software needs an update

Typical repair once the cause is confirmed

Correct any fluid or wiring problem first; if the readings are still wrong, replace the shift position sensor.

Common questions

What does P0915 mean?

The gear shift position sensor is giving readings that don't match what the computer expects for the current conditions. The shift position sensor tells an automated manual transmission how far its shift mechanism has moved forward or back into gear.

Can I drive with code P0915?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P0915?

Common possibilities to test include: failing gear shift position sensor; sticking or worn shift mechanism; high resistance in the wiring or connector; control module software needs an update. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.