P0941 Hydraulic Oil Temperature Sensor Circuit Intermittent
What it means
The signal from the hydraulic oil temperature sensor keeps dropping out or jumping around, which usually points to a loose connection or a damaged wire.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Wiggle-test the wiring and connector while watching live data
- Look for rubbed-through wiring near brackets and moving parts
Signs you may notice
- Check engine or transmission light on
- Shifts may feel firmer or slower than normal
- Problem may come and go, often over bumps
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonLoose or corroded connector
- CommonChafed wiring that opens or shorts as it moves
- PossibleFailing hydraulic oil temperature sensor
Typical repair once the cause is confirmed
Repair the loose connection or damaged wire; replace the hydraulic oil temperature sensor only if it fails testing.
Common questions
What does P0941 mean?
The signal from the hydraulic oil temperature sensor keeps dropping out or jumping around, which usually points to a loose connection or a damaged wire.
Can I drive with code P0941?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P0941?
Common possibilities to test include: loose or corroded connector; chafed wiring that opens or shorts as it moves; failing hydraulic oil temperature sensor. A shop should confirm the cause before replacing parts.