P0943 Hydraulic Pressure Unit Cycling Period Too Short
What it means
The hydraulic pump on an automated manual transmission is switching on again too soon, which means pressure is leaking down quickly.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Look for hydraulic fluid leaks
- Check how fast pressure drops after the pump shuts off
Signs you may notice
- Pump may be heard running often
- Transmission warning light on
- Shifts may become slow or harsh
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonInternal or external hydraulic leak
- CommonWeak pressure accumulator
- PossibleFaulty hydraulic pressure sensor
Typical repair once the cause is confirmed
Repair the leak or replace the accumulator or hydraulic unit.
Common questions
What does P0943 mean?
The hydraulic pump on an automated manual transmission is switching on again too soon, which means pressure is leaking down quickly.
Can I drive with code P0943?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P0943?
Common possibilities to test include: internal or external hydraulic leak; weak pressure accumulator; faulty hydraulic pressure sensor. A shop should confirm the cause before replacing parts.