P0944 Hydraulic Pressure Unit Loss of Pressure
What it means
The hydraulic unit that works the clutch and shifting on an automated manual transmission has lost pressure.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check fluid level and look for leaks
- Check that the pump runs and its fuse and relay are good
Signs you may notice
- Car may not move or may not shift
- Transmission warning light on
- Clutch may not engage or release
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonHydraulic fluid leak
- CommonFailed hydraulic pump
- PossiblePump relay, fuse or wiring fault
- PossibleFaulty hydraulic pressure sensor
Typical repair once the cause is confirmed
Fix the leak or replace the pump or hydraulic unit, then bleed and relearn the system.
Common questions
What does P0944 mean?
The hydraulic unit that works the clutch and shifting on an automated manual transmission has lost pressure.
Can I drive with code P0944?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P0944?
Common possibilities to test include: hydraulic fluid leak; failed hydraulic pump; pump relay, fuse or wiring fault; faulty hydraulic pressure sensor. A shop should confirm the cause before replacing parts.