Home › Code lookup › P0949
Powertrain code · Transmission

P0949 Auto Shift Manual Adaptive Learning Not Complete

How urgent? Book a check when convenient

What it means

The computer has not finished learning how the clutch and shift system behave, so shifts may not be as smooth as they should be.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Run the adaptive learn procedure with a capable scan tool
  2. Scan for other clutch or actuator codes that block learning

Signs you may notice

  • Transmission warning or check engine light on
  • Shifts or take-off may feel rough

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonAdaptive learn not done after repair, battery disconnect or module replacement
  • PossibleClutch or actuator problem stopping the learn from finishing
  • PossibleLow battery voltage during the learn

Typical repair once the cause is confirmed

Complete the adaptive learn procedure; repair any fault that stops it from finishing.

Common questions

What does P0949 mean?

The computer has not finished learning how the clutch and shift system behave, so shifts may not be as smooth as they should be.

Can I drive with code P0949?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0949?

Common possibilities to test include: adaptive learn not done after repair, battery disconnect or module replacement; clutch or actuator problem stopping the learn from finishing; low battery voltage during the learn. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.