Home › Code lookup › P0951
Powertrain code · Transmission

P0951 Auto Shift Manual Control Circuit Range/Performance

How urgent? Book a check when convenient

What it means

The manual shift control (tap-shift) circuit is giving readings that don't match what the computer expects for the current conditions. The manual shift switch carries your up and down requests when you shift the automatic yourself.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Compare the manual shift switch reading with what it should be on a scan tool
  2. Inspect the wiring and connector for corrosion or damage

Signs you may notice

  • Manual or paddle shifting may not work
  • Check engine light on
  • Normal shifting in Drive usually still works

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailing manual shift (tap-shift) switch
  • PossibleHigh resistance in the wiring or connector
  • PossibleControl module software needs an update

Typical repair once the cause is confirmed

Correct any fluid or wiring problem first; if the readings are still wrong, replace the manual shift switch.

Repair costInsufficient verified pricing for this vehicle and repair
Replace manual shift switch. Prepare an itemized shop request.

Common questions

What does P0951 mean?

The manual shift control (tap-shift) circuit is giving readings that don't match what the computer expects for the current conditions. The manual shift switch carries your up and down requests when you shift the automatic yourself.

Can I drive with code P0951?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0951?

Common possibilities to test include: failing manual shift (tap-shift) switch; high resistance in the wiring or connector; control module software needs an update. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.