P0954 Auto Shift Manual Control Circuit Intermittent
What it means
The signal from the manual shift control (tap-shift) circuit keeps dropping out or jumping around, which usually points to a loose connection or a damaged wire.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Wiggle-test the wiring and connector while watching live data
- Look for rubbed-through wiring near brackets and moving parts
Signs you may notice
- Manual or paddle shifting may not work
- Check engine light on
- Normal shifting in Drive usually still works
- Problem may come and go, often over bumps
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonLoose or corroded connector
- CommonChafed wiring that opens or shorts as it moves
- PossibleFailing manual shift (tap-shift) switch
Typical repair once the cause is confirmed
Repair the loose connection or damaged wire; replace the manual shift switch only if it fails testing.
Common questions
What does P0954 mean?
The signal from the manual shift control (tap-shift) circuit keeps dropping out or jumping around, which usually points to a loose connection or a damaged wire.
Can I drive with code P0954?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P0954?
Common possibilities to test include: loose or corroded connector; chafed wiring that opens or shorts as it moves; failing manual shift (tap-shift) switch. A shop should confirm the cause before replacing parts.