P0955 Auto Shift Manual Mode Circuit
What it means
The computer found an electrical problem in the circuit for the manual mode switch circuit, which tells the computer you have moved the shifter into manual (plus/minus) mode.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Look over the wiring and connector at the manual mode switch for damage, rubbing or corrosion
- Check related fuses, power and ground with a meter
- Test the manual mode switch against the factory specification before replacing it
Signs you may notice
- Manual mode may not work or may switch on by itself
- Check engine light on
- Normal shifting in Drive usually still works
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailed manual mode switch
- CommonBroken or damaged wiring to the manual mode switch
- CommonLoose, corroded or water-damaged connector
- PossibleBlown fuse or missing power or ground
- PossibleFaulty transmission or engine computer (rare)
Typical repair once the cause is confirmed
Repair any wiring or connector fault found; if the circuit tests good, replace the manual mode switch.
Common questions
What does P0955 mean?
The computer found an electrical problem in the circuit for the manual mode switch circuit, which tells the computer you have moved the shifter into manual (plus/minus) mode.
Can I drive with code P0955?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P0955?
Common possibilities to test include: failed manual mode switch; broken or damaged wiring to the manual mode switch; loose, corroded or water-damaged connector; blown fuse or missing power or ground. A shop should confirm the cause before replacing parts.