Home › Code lookup › P0957
Powertrain code · Transmission

P0957 Auto Shift Manual Mode Circuit Low

How urgent? Book a check when convenient

What it means

The computer sees a signal or voltage in the manual mode switch circuit circuit that is lower than it should be. The manual mode switch tells the computer you have moved the shifter into manual (plus/minus) mode.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect the manual mode switch wiring for chafed spots touching metal
  2. Check the circuit for a short to ground with a meter
  3. Unplug the manual mode switch and see whether the reading changes

Signs you may notice

  • Manual mode may not work or may switch on by itself
  • Check engine light on
  • Normal shifting in Drive usually still works

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonWire shorted to ground in the manual mode switch circuit
  • CommonFailed manual mode switch (internal short)
  • PossibleCorroded or water-damaged connector
  • PossibleFaulty control module (rare)

Typical repair once the cause is confirmed

Fix any shorted or damaged wiring; if the wiring is good, replace the manual mode switch.

Repair costInsufficient verified pricing for this vehicle and repair
Replace manual mode switch. Prepare an itemized shop request.

Common questions

What does P0957 mean?

The computer sees a signal or voltage in the manual mode switch circuit circuit that is lower than it should be. The manual mode switch tells the computer you have moved the shifter into manual (plus/minus) mode.

Can I drive with code P0957?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0957?

Common possibilities to test include: wire shorted to ground in the manual mode switch circuit; failed manual mode switch (internal short); corroded or water-damaged connector; faulty control module (rare). A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.