Home › Code lookup › P0973
Powertrain code · Transmission

P0973 Shift Solenoid A Control Circuit Low

How urgent? Get it checked in the next few days

What it means

The computer sees a voltage in the shift solenoid A control circuit that is lower than it should be, often from a shorted wire or a failed solenoid. This solenoid helps the transmission change gears.

Can I keep driving?

Usually drivable with care to get it checked soon, but the transmission may stay in one gear, giving slow acceleration or high RPM. Avoid highways if it won't shift properly. If it slips, bangs into gear or a warning message appears, stop and get it checked before going further.

What to test before replacing parts

Check the shift solenoid A control circuit for a short to ground, measure solenoid resistance, and inspect the connector and harness before replacing the solenoid or computer.

  1. Inspect the shift solenoid wiring for chafed spots touching metal
  2. Check the circuit for a short to ground with a meter
  3. Unplug the shift solenoid and see whether the reading changes

Signs you may notice

  • Check engine light on
  • Missing, late or harsh shifts
  • Transmission may stay in one gear (limp mode)

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailed shift solenoid A
  • CommonWire shorted to ground in the solenoid circuit
  • CommonCorroded or fluid-soaked connector at the transmission
  • PossibleFaulty transmission computer (rare)

Typical repair once the cause is confirmed

Fix any shorted or damaged wiring; if the wiring is good, replace the shift solenoid.

Repair costInsufficient verified pricing for this vehicle and repair
Replace shift solenoid. Prepare an itemized shop request.
Walk through it step by step: Harsh or late shifting →

Common questions

What does P0973 mean?

The computer sees a voltage in the shift solenoid A control circuit that is lower than it should be, often from a shorted wire or a failed solenoid. This solenoid helps the transmission change gears.

Can I drive with code P0973?

Usually drivable with care to get it checked soon, but the transmission may stay in one gear, giving slow acceleration or high RPM. Avoid highways if it won't shift properly. If it slips, bangs into gear or a warning message appears, stop and get it checked before going further.

What causes P0973?

Common possibilities to test include: failed shift solenoid a; wire shorted to ground in the solenoid circuit; corroded or fluid-soaked connector at the transmission; faulty transmission computer (rare). A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.