P0991 Transmission Fluid Pressure Sensor/Switch E Circuit Intermittent
What it means
The signal from the transmission fluid pressure sensor/switch E keeps dropping out or jumping around, which usually points to a loose connection or a damaged wire.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Wiggle-test the wiring and connector while watching live data
- Look for rubbed-through wiring near brackets and moving parts
Signs you may notice
- Check engine light on
- Harsh, late or erratic shifting
- Transmission may stay in one gear (limp mode)
- Problem may come and go, often over bumps
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonLoose or corroded connector
- CommonChafed wiring that opens or shorts as it moves
- PossibleFailing transmission fluid pressure sensor/switch
Typical repair once the cause is confirmed
Repair the loose connection or damaged wire; replace the pressure sensor/switch only if it fails testing.
Common questions
What does P0991 mean?
The signal from the transmission fluid pressure sensor/switch E keeps dropping out or jumping around, which usually points to a loose connection or a damaged wire.
Can I drive with code P0991?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P0991?
Common possibilities to test include: loose or corroded connector; chafed wiring that opens or shorts as it moves; failing transmission fluid pressure sensor/switch. A shop should confirm the cause before replacing parts.