Home › Code lookup › P2000
Powertrain code · Emissions

P2000 NOx Trap Efficiency Below Threshold Bank 1

How urgent? Book a check when convenient

What it means

The NOx trap (a special catalytic converter that stores and burns off nitrogen oxide pollution) on bank 1 (the side of the engine with cylinder 1) isn't working as well as it should. This is found on some diesel and lean-burn gasoline engines.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check for exhaust leaks and other engine codes first
  2. Check NOx sensor readings in live data
  3. Use high-quality, low-sulfur fuel and let the system run a cleaning cycle

Signs you may notice

  • Check engine light on
  • Usually no change in how the car drives
  • May fail an emissions inspection

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonWorn-out or sulfur-contaminated NOx trap
  • CommonFaulty NOx sensor
  • PossibleExhaust leak near the sensors
  • PossibleEngine running rich or burning oil

Typical repair once the cause is confirmed

Fix sensor or leak problems first; a worn NOx trap has to be replaced.

Repair costInsufficient verified pricing for this vehicle and repair
Replace NOx storage catalyst. Prepare an itemized shop request.
Walk through it step by step: Check engine light on →

Common questions

What does P2000 mean?

The NOx trap (a special catalytic converter that stores and burns off nitrogen oxide pollution) on bank 1 (the side of the engine with cylinder 1) isn't working as well as it should. This is found on some diesel and lean-burn gasoline engines.

Can I drive with code P2000?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P2000?

Common possibilities to test include: worn-out or sulfur-contaminated nox trap; faulty nox sensor; exhaust leak near the sensors; engine running rich or burning oil. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.