Home › Code lookup › P2003
Powertrain code · Emissions

P2003 Diesel Particulate Filter Efficiency Below Threshold Bank 2

How urgent? Get it checked in the next few days

What it means

The computer thinks the diesel particulate filter (DPF) on bank 2 isn't trapping soot like it should, usually from a cracked filter or bad pressure readings.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect DPF pressure sensor hoses
  2. Compare DPF pressure readings in live data

Signs you may notice

  • Check engine light on
  • Possible black smoke at the tailpipe
  • Possible reduced engine power

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonCracked or damaged diesel particulate filter
  • CommonFaulty DPF pressure sensor or hoses
  • PossibleExhaust leak before the filter

Typical repair once the cause is confirmed

Repair the pressure sensor or hoses if faulty; replace the filter if it is cracked.

Repair costInsufficient verified pricing for this vehicle and repair
Replace diesel particulate filter. Prepare an itemized shop request.

Common questions

What does P2003 mean?

The computer thinks the diesel particulate filter (DPF) on bank 2 isn't trapping soot like it should, usually from a cracked filter or bad pressure readings.

Can I drive with code P2003?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P2003?

Common possibilities to test include: cracked or damaged diesel particulate filter; faulty dpf pressure sensor or hoses; exhaust leak before the filter. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.