Home › Code lookup › P200D
Powertrain code · Emissions

P200D Diesel Particulate Filter Over Temperature Bank 2

How urgent? Get it checked in the next few days

What it means

The diesel particulate filter on bank 2 (the side of the engine opposite cylinder 1) got hotter than it should. This can happen during a soot burn-off when too much soot or extra fuel burns at once.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check exhaust temperature sensor readings
  2. Check for leaking injectors or oil getting into the exhaust

Signs you may notice

  • Check engine light on
  • Reduced engine power
  • Possible smell of hot exhaust

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonToo much soot in the filter burning at once
  • CommonLeaking or dripping fuel injector adding raw fuel
  • PossibleFaulty exhaust temperature sensor
  • PossibleOil getting into the exhaust from a turbo or engine problem

Typical repair once the cause is confirmed

Fix the source of extra fuel or soot, then check the filter for heat damage; replace the filter if it is cracked.

Repair costInsufficient verified pricing for this vehicle and repair
Replace diesel particulate filter. Prepare an itemized shop request.

Common questions

What does P200D mean?

The diesel particulate filter on bank 2 (the side of the engine opposite cylinder 1) got hotter than it should. This can happen during a soot burn-off when too much soot or extra fuel burns at once.

Can I drive with code P200D?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P200D?

Common possibilities to test include: too much soot in the filter burning at once; leaking or dripping fuel injector adding raw fuel; faulty exhaust temperature sensor; oil getting into the exhaust from a turbo or engine problem. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.