P200F Catalyst System Over Temperature Bank 2
What it means
The catalytic converter on bank 2 (the side of the engine opposite cylinder 1) is running too hot. Unburned fuel from a misfire or rich running is usually burning inside it.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check for misfire and fuel trim codes and fix them first
- Check exhaust temperature sensor readings
Signs you may notice
- Check engine light on
- Possible misfire or rough running
- Possible rotten egg or burning smell
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonEngine misfire sending unburned fuel into the exhaust
- CommonEngine running too rich
- PossibleFaulty exhaust temperature sensor
- PossibleLeaking fuel injector
Typical repair once the cause is confirmed
Fix the misfire or rich condition quickly; a converter that overheated may need replacing.
Common questions
What does P200F mean?
The catalytic converter on bank 2 (the side of the engine opposite cylinder 1) is running too hot. Unburned fuel from a misfire or rich running is usually burning inside it.
Can I drive with code P200F?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P200F?
Common possibilities to test include: engine misfire sending unburned fuel into the exhaust; engine running too rich; faulty exhaust temperature sensor; leaking fuel injector. A shop should confirm the cause before replacing parts.