P2018 Intake Manifold Runner Position Sensor/Switch Circuit Intermittent Bank 1
What it means
The signal from the intake manifold runner position sensor on bank 1 keeps dropping out or jumping around. This sensor tells the computer where the intake flaps are. A loose connection or a damaged wire is the usual reason.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Wiggle the harness and connector while watching live data for dropouts
- Inspect the runner position sensor wiring along its whole route
Signs you may notice
- Check engine light on
- Slightly weaker power at some engine speeds
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonLoose or corroded connector
- CommonChafed wire that opens or shorts as the engine moves
- PossibleFailing runner position sensor (often part of the actuator)
Typical repair once the cause is confirmed
Repair any damaged wiring or connector first; if the circuit tests good, replace the runner position sensor (often part of the actuator).
Common questions
What does P2018 mean?
The signal from the intake manifold runner position sensor on bank 1 keeps dropping out or jumping around. This sensor tells the computer where the intake flaps are. A loose connection or a damaged wire is the usual reason.
Can I drive with code P2018?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P2018?
Common possibilities to test include: loose or corroded connector; chafed wire that opens or shorts as the engine moves; failing runner position sensor (often part of the actuator). A shop should confirm the cause before replacing parts.