P2026 Evaporative Emissions (EVAP) Fuel Vapor Temperature Sensor Circuit Low Voltage
What it means
The signal from the EVAP fuel vapor temperature sensor is lower than the computer expects. This sensor measures the temperature of fuel vapor in the evaporative emissions system. A wire shorted to ground or a failed sensor is the usual reason.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Inspect the vapor temperature sensor wiring for rubbed-through or pinched spots
- Unplug the sensor and see if the reading changes, which helps separate wiring from sensor
Signs you may notice
- Check engine light on
- Usually no change in how the car drives
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonSignal or reference wire shorted to ground
- CommonFailed fuel vapor temperature sensor
- PossibleCorroded or damaged connector
- PossibleEngine computer problem (rare)
Typical repair once the cause is confirmed
Repair any damaged wiring or connector first; if the circuit tests good, replace the fuel vapor temperature sensor.
Common questions
What does P2026 mean?
The signal from the EVAP fuel vapor temperature sensor is lower than the computer expects. This sensor measures the temperature of fuel vapor in the evaporative emissions system. A wire shorted to ground or a failed sensor is the usual reason.
Can I drive with code P2026?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P2026?
Common possibilities to test include: signal or reference wire shorted to ground; failed fuel vapor temperature sensor; corroded or damaged connector; engine computer problem (rare). A shop should confirm the cause before replacing parts.