P2028 Evaporative Emissions (EVAP) Fuel Vapor Temperature Sensor Circuit Intermittent
What it means
The signal from the EVAP fuel vapor temperature sensor keeps dropping out or jumping around. This sensor measures the temperature of fuel vapor in the evaporative emissions system. A loose connection or a damaged wire is the usual reason.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Wiggle the harness and connector while watching live data for dropouts
- Inspect the vapor temperature sensor wiring along its whole route
Signs you may notice
- Check engine light on
- Usually no change in how the car drives
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonLoose or corroded connector
- CommonChafed wire that opens or shorts as the engine moves
- PossibleFailing fuel vapor temperature sensor
Typical repair once the cause is confirmed
Repair any damaged wiring or connector first; if the circuit tests good, replace the fuel vapor temperature sensor.
Common questions
What does P2028 mean?
The signal from the EVAP fuel vapor temperature sensor keeps dropping out or jumping around. This sensor measures the temperature of fuel vapor in the evaporative emissions system. A loose connection or a damaged wire is the usual reason.
Can I drive with code P2028?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P2028?
Common possibilities to test include: loose or corroded connector; chafed wire that opens or shorts as the engine moves; failing fuel vapor temperature sensor. A shop should confirm the cause before replacing parts.