P2034 Exhaust Gas Temperature Sensor Circuit Bank 2 Sensor 2
What it means
The engine computer has found a problem in the circuit for the exhaust gas temperature sensor (bank 2, sensor 2), which measures exhaust heat to protect the turbo, catalytic converter or particulate filter. It usually points to wiring, a connector or the sensor itself.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Inspect the EGT sensor connector and wiring for damage or corrosion
- Check the sensor power, ground and signal with a meter
Signs you may notice
- Check engine light on
- Particulate filter cleaning may be blocked on diesels
- Possible reduced power on some vehicles
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty exhaust gas temperature sensor
- CommonDamaged, corroded or unplugged connector
- PossibleBroken or chafed wiring
- PossibleEngine computer problem (rare)
Typical repair once the cause is confirmed
Repair any damaged wiring or connector first; if the circuit tests good, replace the exhaust gas temperature sensor.
Common questions
What does P2034 mean?
The engine computer has found a problem in the circuit for the exhaust gas temperature sensor (bank 2, sensor 2), which measures exhaust heat to protect the turbo, catalytic converter or particulate filter. It usually points to wiring, a connector or the sensor itself.
Can I drive with code P2034?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P2034?
Common possibilities to test include: faulty exhaust gas temperature sensor; damaged, corroded or unplugged connector; broken or chafed wiring; engine computer problem (rare). A shop should confirm the cause before replacing parts.