P2038 Reductant Injection Air Pressure Sensor Circuit Range/Performance
What it means
The reductant injection air pressure sensor is giving readings that don't make sense compared with what the computer expects. This sensor monitors the air used to help spray diesel exhaust fluid (DEF) into the exhaust. The sensor may be failing or the system it watches may have a real problem.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Compare the air pressure sensor reading with related sensors in live data
- Check wiring and connector for corrosion or looseness
Signs you may notice
- Check engine light on
- DEF or emissions warning on the dash
- A countdown to reduced speed may start if not repaired
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailing or out-of-calibration reductant air pressure sensor
- CommonAir supply problem in the DEF injection system
- PossibleHigh resistance in the wiring or connector
Typical repair once the cause is confirmed
Confirm the system itself is working, then replace the reductant air pressure sensor if its readings are off.
Common questions
What does P2038 mean?
The reductant injection air pressure sensor is giving readings that don't make sense compared with what the computer expects. This sensor monitors the air used to help spray diesel exhaust fluid (DEF) into the exhaust. The sensor may be failing or the system it watches may have a real problem.
Can I drive with code P2038?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P2038?
Common possibilities to test include: failing or out-of-calibration reductant air pressure sensor; air supply problem in the def injection system; high resistance in the wiring or connector. A shop should confirm the cause before replacing parts.