P204B Reductant Pressure Sensor Circuit Range/Performance
What it means
The reductant (DEF) pressure sensor is giving readings that don't make sense compared with what the computer expects. This sensor monitors the pressure of the diesel exhaust fluid being sent to the injector. The sensor may be failing or the system it watches may have a real problem.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Compare the DEF pressure sensor reading with related sensors in live data
- Check wiring and connector for corrosion or looseness
Signs you may notice
- Check engine light on
- DEF or emissions warning on the dash
- A countdown to reduced speed may start if not repaired
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailing or out-of-calibration DEF pressure sensor (often part of the pump module)
- CommonWeak DEF pump, clogged filter or leak
- PossibleHigh resistance in the wiring or connector
Typical repair once the cause is confirmed
Confirm the system itself is working, then replace the DEF pressure sensor (often part of the pump module) if its readings are off.
Common questions
What does P204B mean?
The reductant (DEF) pressure sensor is giving readings that don't make sense compared with what the computer expects. This sensor monitors the pressure of the diesel exhaust fluid being sent to the injector. The sensor may be failing or the system it watches may have a real problem.
Can I drive with code P204B?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P204B?
Common possibilities to test include: failing or out-of-calibration def pressure sensor (often part of the pump module); weak def pump, clogged filter or leak; high resistance in the wiring or connector. A shop should confirm the cause before replacing parts.