P2063 Reductant Supply Control Circuit Low
What it means
The control circuit for the reductant (DEF) supply pump is reading low voltage. This part pressurizes diesel exhaust fluid and sends it to the injector. A wire shorted to ground or a shorted part is the usual reason.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check the DEF pump wiring for rubbed-through insulation
- Measure the DEF pump resistance and compare with spec
Signs you may notice
- Check engine light on
- DEF or emissions warning on the dash
- A countdown to reduced speed may start if not repaired
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonControl wire shorted to ground
- CommonInternally shorted DEF supply pump or pump module
- PossibleDamaged connector
- PossibleEngine computer driver problem (rare)
Typical repair once the cause is confirmed
Repair any wiring fault first; if the wiring tests good, replace the DEF supply pump or pump module.
Common questions
What does P2063 mean?
The control circuit for the reductant (DEF) supply pump is reading low voltage. This part pressurizes diesel exhaust fluid and sends it to the injector. A wire shorted to ground or a shorted part is the usual reason.
Can I drive with code P2063?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P2063?
Common possibilities to test include: control wire shorted to ground; internally shorted def supply pump or pump module; damaged connector; engine computer driver problem (rare). A shop should confirm the cause before replacing parts.