P2066 Fuel Level Sensor B Performance
What it means
The fuel level sensor B is giving readings that don't make sense compared with what the computer expects. This sensor reads the fuel level in the second half of a saddle-shaped fuel tank (used on many all-wheel-drive cars and trucks). The sensor may be failing or the system it watches may have a real problem.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Compare the fuel level sensor reading with related sensors in live data
- Check wiring and connector for corrosion or looseness
Signs you may notice
- Check engine light on
- Fuel gauge reads wrong or jumps around
- Low fuel warning may come on at the wrong time
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailing or out-of-calibration fuel level sending unit B
- CommonSticking float arm or worn sender track
- PossibleHigh resistance in the wiring or connector
Typical repair once the cause is confirmed
Confirm the system itself is working, then replace the fuel level sending unit B if its readings are off.
Common questions
What does P2066 mean?
The fuel level sensor B is giving readings that don't make sense compared with what the computer expects. This sensor reads the fuel level in the second half of a saddle-shaped fuel tank (used on many all-wheel-drive cars and trucks). The sensor may be failing or the system it watches may have a real problem.
Can I drive with code P2066?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P2066?
Common possibilities to test include: failing or out-of-calibration fuel level sending unit b; sticking float arm or worn sender track; high resistance in the wiring or connector. A shop should confirm the cause before replacing parts.