Home › Code lookup › P2070
Powertrain code · Fuel and air

P2070 Intake Manifold Tuning (IMT) Valve Stuck Open

How urgent? Book a check when convenient

What it means

The intake manifold tuning valve, which switches the path air takes through the intake to boost power at different speeds, appears stuck open.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Command the valve with a scan tool and watch it move
  2. Check wiring, connector and any vacuum lines

Signs you may notice

  • Check engine light on
  • Slightly weaker power at low or high engine speeds
  • Possible rattle from the intake

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailed intake manifold tuning valve
  • CommonCarbon buildup or broken valve linkage
  • PossibleWiring or connector problem
  • PossibleVacuum leak on a vacuum-operated valve

Typical repair once the cause is confirmed

Replace the intake manifold tuning valve if it is stuck or broken.

Repair costInsufficient verified pricing for this vehicle and repair
Replace intake manifold tuning valve. Prepare an itemized shop request.

Known on these vehicles

Common questions

What does P2070 mean?

The intake manifold tuning valve, which switches the path air takes through the intake to boost power at different speeds, appears stuck open.

Can I drive with code P2070?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P2070?

Common possibilities to test include: failed intake manifold tuning valve; carbon buildup or broken valve linkage; wiring or connector problem; vacuum leak on a vacuum-operated valve. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.