Home › Code lookup › P2073
Powertrain code · Fuel and air

P2073 Manifold Absolute Pressure/Mass Air Flow - Throttle Position Correlation at Idle

How urgent? Get it checked in the next few days

What it means

The computer compares how much air the engine is taking in (at idle) with how far the throttle is open, and the numbers don't agree. A vacuum leak or a bad airflow sensor is the usual cause.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check for vacuum leaks and loose intake ducts
  2. Compare MAF, MAP and throttle readings in live data

Signs you may notice

  • Check engine light on
  • Rough idle or stalling
  • Possible reduced power mode

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonVacuum or intake air leak
  • CommonDirty or faulty mass airflow (MAF) sensor
  • PossibleFaulty manifold pressure (MAP) sensor
  • PossibleDirty or sticking throttle body

Typical repair once the cause is confirmed

Fix any air leak, then clean or replace the airflow or pressure sensor if readings are still off.

Repair costInsufficient verified pricing for this vehicle and repair
Replace mass airflow sensor. Prepare an itemized shop request.
Walk through it step by step: Rough idle or shaking when stopped →

Common questions

What does P2073 mean?

The computer compares how much air the engine is taking in (at idle) with how far the throttle is open, and the numbers don't agree. A vacuum leak or a bad airflow sensor is the usual cause.

Can I drive with code P2073?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P2073?

Common possibilities to test include: vacuum or intake air leak; dirty or faulty mass airflow (maf) sensor; faulty manifold pressure (map) sensor; dirty or sticking throttle body. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.