P2080 Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 1
What it means
The exhaust gas temperature sensor (bank 1, sensor 1) is giving readings that don't make sense compared with what the computer expects. This sensor measures exhaust heat to protect the turbo, catalytic converter or particulate filter. The sensor may be failing or the system it watches may have a real problem.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Compare the EGT sensor reading with related sensors in live data
- Check wiring and connector for corrosion or looseness
Signs you may notice
- Check engine light on
- Particulate filter cleaning may be blocked on diesels
- Possible reduced power on some vehicles
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailing or out-of-calibration exhaust gas temperature sensor
- CommonExhaust leak or a real temperature problem in the exhaust
- PossibleHigh resistance in the wiring or connector
Typical repair once the cause is confirmed
Confirm the system itself is working, then replace the exhaust gas temperature sensor if its readings are off.
Common questions
What does P2080 mean?
The exhaust gas temperature sensor (bank 1, sensor 1) is giving readings that don't make sense compared with what the computer expects. This sensor measures exhaust heat to protect the turbo, catalytic converter or particulate filter. The sensor may be failing or the system it watches may have a real problem.
Can I drive with code P2080?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P2080?
Common possibilities to test include: failing or out-of-calibration exhaust gas temperature sensor; exhaust leak or a real temperature problem in the exhaust; high resistance in the wiring or connector. A shop should confirm the cause before replacing parts.