Home › Code lookup › P2114
Powertrain code · Speed and idle control

P2114 Throttle/Pedal Position Sensor C Minimum Stop Performance

How urgent? Get it checked in the next few days

What it means

Throttle or pedal position sensor C isn't reading what the computer expects when the throttle or pedal is fully released. The resting position may be off or the sensor may be worn.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Clean the throttle body and check that it closes fully
  2. Run a throttle position relearn with a scan tool

Signs you may notice

  • Check engine light on
  • Idle too high or too low
  • Possible reduced power mode

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonCarbon buildup keeping the throttle from closing fully
  • CommonWorn throttle or pedal position sensor
  • PossibleSticking pedal or throttle return spring
  • PossibleThrottle relearn not done after cleaning or battery disconnect

Typical repair once the cause is confirmed

Clean the throttle and run a relearn; replace the throttle body or pedal if the reading is still off.

Repair costInsufficient verified pricing for this vehicle and repair
Replace electronic throttle body. Prepare an itemized shop request.
Walk through it step by step: Engine idles high →

Common questions

What does P2114 mean?

Throttle or pedal position sensor C isn't reading what the computer expects when the throttle or pedal is fully released. The resting position may be off or the sensor may be worn.

Can I drive with code P2114?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P2114?

Common possibilities to test include: carbon buildup keeping the throttle from closing fully; worn throttle or pedal position sensor; sticking pedal or throttle return spring; throttle relearn not done after cleaning or battery disconnect. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.