Home › Code lookup › P2118
Powertrain code · Speed and idle control

P2118 Throttle Actuator Control Motor Current Range/Performance

How urgent? Get it checked in the next few days

What it means

The electric motor that moves the throttle is drawing more or less current than expected. It may be binding, worn or have a wiring issue.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Clean the throttle body and check that the plate moves freely
  2. Inspect the throttle wiring and connector

Signs you may notice

  • Check engine light on
  • Reduced engine power or limp mode
  • Poor throttle response

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonThrottle motor binding from carbon or wear
  • CommonFailing throttle motor
  • PossibleWiring or connector fault
  • PossibleEngine computer problem (rare)

Typical repair once the cause is confirmed

Clean the throttle; replace the throttle body if the motor is worn.

Repair costInsufficient verified pricing for this vehicle and repair
Replace electronic throttle body. Prepare an itemized shop request.

Known on these vehicles

Walk through it step by step: Reduced engine power / limp mode →

Common questions

What does P2118 mean?

The electric motor that moves the throttle is drawing more or less current than expected. It may be binding, worn or have a wiring issue.

Can I drive with code P2118?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P2118?

Common possibilities to test include: throttle motor binding from carbon or wear; failing throttle motor; wiring or connector fault; engine computer problem (rare). A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.