P2119 Throttle Actuator Control Throttle Body Range/Performance
What it means
The throttle plate isn't returning to or holding the position the computer expects. Carbon buildup or a worn throttle body is the usual reason.
Can I keep driving?
Use care. You may get reduced power, a rough or high idle, or stalling. If it stalls, surges or won't respond properly to the pedal, don't drive it in traffic; have it towed. If it runs normally, take it to a shop soon.
What to test before replacing parts
Clean and inspect the throttle body, check that the blade moves freely, test the motor and sensor wiring, and run a throttle relearn if needed before replacing the throttle body.
- Inspect and clean the throttle body
- Check the throttle connector and wiring
- Check for service bulletins for your vehicle
Signs you may notice
- Check engine light on
- Reduced engine power or limp mode
- Rough or high idle
- Stalling in some cases
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonCarbon buildup on the throttle plate and bore
- CommonWorn or failing electronic throttle body
- PossibleWeak throttle return spring
- PossibleWiring or connector problem
- PossibleIce in the throttle body in cold weather
Typical repair once the cause is confirmed
Clean the throttle body and run a relearn; if the code returns, replace the throttle body.
Known on these vehicles
Common questions
What does P2119 mean?
The throttle plate isn't returning to or holding the position the computer expects. Carbon buildup or a worn throttle body is the usual reason.
Can I drive with code P2119?
Use care. You may get reduced power, a rough or high idle, or stalling. If it stalls, surges or won't respond properly to the pedal, don't drive it in traffic; have it towed. If it runs normally, take it to a shop soon.
What causes P2119?
Common possibilities to test include: carbon buildup on the throttle plate and bore; worn or failing electronic throttle body; weak throttle return spring; wiring or connector problem. A shop should confirm the cause before replacing parts.