Home › Code lookup › P2131
Powertrain code · Speed and idle control

P2131 Throttle/Pedal Position Sensor/Switch F Circuit Range/Performance

How urgent? Get it checked in the next few days

What it means

The throttle/pedal position sensor F is giving readings that don't make sense compared with what the computer expects. This sensor helps tell the computer how far the gas pedal is pressed or how open the throttle is. The sensor may be failing or the system it watches may have a real problem.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Compare the pedal or throttle sensor reading with related sensors in live data
  2. Check wiring and connector for corrosion or looseness

Signs you may notice

  • Check engine light on
  • Reduced engine power or limp mode
  • Poor or no response to the gas pedal

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailing or out-of-calibration accelerator pedal position sensor (usually part of the pedal)
  • CommonA real fault in the system the sensor monitors
  • PossibleHigh resistance in the wiring or connector

Typical repair once the cause is confirmed

Confirm the system itself is working, then replace the accelerator pedal position sensor (usually part of the pedal) if its readings are off.

Repair costInsufficient verified pricing for this vehicle and repair
Replace accelerator pedal assembly. Prepare an itemized shop request.
Walk through it step by step: Reduced engine power / limp mode →

Common questions

What does P2131 mean?

The throttle/pedal position sensor F is giving readings that don't make sense compared with what the computer expects. This sensor helps tell the computer how far the gas pedal is pressed or how open the throttle is. The sensor may be failing or the system it watches may have a real problem.

Can I drive with code P2131?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P2131?

Common possibilities to test include: failing or out-of-calibration accelerator pedal position sensor (usually part of the pedal); a real fault in the system the sensor monitors; high resistance in the wiring or connector. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.