P2148 Fuel Injector Group "A" Supply Voltage Circuit High
What it means
The power supply that feeds a group of fuel injectors (group A) is reading too high. Those injectors may not fire properly, causing misfires or rough running.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check the injector fuses and relay
- Check for supply voltage at each injector in the group
Signs you may notice
- Check engine light on
- Engine misfire or rough running
- Hard starting or stalling
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonBlown fuse or failed injector power relay
- CommonDamaged injector supply wiring or connector
- PossibleShorted fuel injector pulling the circuit down
- PossibleEngine computer driver problem
Typical repair once the cause is confirmed
Replace a blown fuse or bad relay and repair the wiring or shorted injector that caused it.
Common questions
What does P2148 mean?
The power supply that feeds a group of fuel injectors (group A) is reading too high. Those injectors may not fire properly, causing misfires or rough running.
Can I drive with code P2148?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P2148?
Common possibilities to test include: blown fuse or failed injector power relay; damaged injector supply wiring or connector; shorted fuel injector pulling the circuit down; engine computer driver problem. A shop should confirm the cause before replacing parts.