Home › Code lookup › P2162
Powertrain code · Transmission

P2162 Vehicle Speed Sensor "A"/"B" Correlation

How urgent? Get it checked in the next few days

What it means

The vehicle has two speed sensors and their readings don't agree. One sensor or its wiring is usually giving a bad signal.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Compare both speed readings in live data while driving
  2. Inspect both sensors, connectors and wiring

Signs you may notice

  • Check engine light on
  • Speedometer erratic or not working
  • Harsh or odd shifting
  • ABS or traction light may come on

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailing speed sensor A or B
  • CommonDamaged wiring or connector at a speed sensor
  • PossibleMetal debris on a sensor tip or damaged tone ring
  • PossibleWrong tire sizes front to rear

Typical repair once the cause is confirmed

Replace the sensor that reads wrong and repair any wiring damage.

Repair costInsufficient verified pricing for this vehicle and repair
Replace vehicle speed sensor. Prepare an itemized shop request.
Walk through it step by step: Harsh or late shifting →

Common questions

What does P2162 mean?

The vehicle has two speed sensors and their readings don't agree. One sensor or its wiring is usually giving a bad signal.

Can I drive with code P2162?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P2162?

Common possibilities to test include: failing speed sensor a or b; damaged wiring or connector at a speed sensor; metal debris on a sensor tip or damaged tone ring; wrong tire sizes front to rear. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.