Home › Code lookup › P2165
Powertrain code · Speed and idle control

P2165 Throttle/Pedal Position Sensor "C" Maximum Stop Performance

How urgent? Get it checked in the next few days

What it means

Throttle or pedal position sensor C isn't reading what the computer expects when the throttle or pedal is fully pressed. The sensor may be worn or the pedal may not be reaching full travel.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Make sure nothing blocks the pedal and that it reaches full travel
  2. Watch sensor readings at full pedal in live data

Signs you may notice

  • Check engine light on
  • Possible reduced power at full throttle
  • Possible limp mode

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonWorn throttle or pedal position sensor
  • CommonFloor mat or object blocking full pedal travel
  • PossibleThrottle body not opening fully
  • PossibleWiring or connector problem

Typical repair once the cause is confirmed

Clear any obstruction; replace the pedal or throttle body if its sensor reads wrong at full travel.

Repair costInsufficient verified pricing for this vehicle and repair
Replace accelerator pedal assembly. Prepare an itemized shop request.
Walk through it step by step: Reduced engine power / limp mode →

Common questions

What does P2165 mean?

Throttle or pedal position sensor C isn't reading what the computer expects when the throttle or pedal is fully pressed. The sensor may be worn or the pedal may not be reaching full travel.

Can I drive with code P2165?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P2165?

Common possibilities to test include: worn throttle or pedal position sensor; floor mat or object blocking full pedal travel; throttle body not opening fully; wiring or connector problem. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.