Home › Code lookup › P2193
Powertrain code · Fuel and air

P2193 System Too Lean at Higher Load Bank 2

How urgent? Book a check when convenient

What it means

The engine on bank 2 (the side of the engine opposite cylinder 1) is running too lean under heavier load like accelerating or climbing hills, and the computer has reached the limit of what it can correct. Too much air or too little fuel is getting in.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check fuel pressure under load
  2. Inspect and clean the MAF sensor

Signs you may notice

  • Check engine light on
  • Hesitation or lack of power when accelerating
  • Possible stalling

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonWeak fuel pump or clogged fuel filter
  • CommonDirty or faulty mass airflow (MAF) sensor
  • CommonClogged or weak fuel injectors
  • PossibleVacuum or intake air leak

Typical repair once the cause is confirmed

Find and repair the leak or fuel delivery problem; replacing parts without testing rarely fixes it.

Repair costInsufficient verified pricing for this vehicle and repair
Walk through it step by step: Car has no power when accelerating →

Common questions

What does P2193 mean?

The engine on bank 2 (the side of the engine opposite cylinder 1) is running too lean under heavier load like accelerating or climbing hills, and the computer has reached the limit of what it can correct. Too much air or too little fuel is getting in.

Can I drive with code P2193?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P2193?

Common possibilities to test include: weak fuel pump or clogged fuel filter; dirty or faulty mass airflow (maf) sensor; clogged or weak fuel injectors; vacuum or intake air leak. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.