P2416 O2 Sensor Signals Swapped Bank 1 Sensor 2 / Bank 1 Sensor 3
What it means
The computer thinks the sensor 2 and sensor 3 oxygen sensors on bank 1 are plugged into each other's connectors. This usually happens after one is replaced.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Trace each sensor's wire to the correct connector
- Review any recent exhaust or sensor work
Signs you may notice
- Check engine light on
- Usually no change in how the car drives
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonOxygen sensor connectors swapped
- CommonWiring crossed during a repair
- PossibleWrong sensor installed
Typical repair once the cause is confirmed
Plug the sensors into the correct connectors and clear the code.
Common questions
What does P2416 mean?
The computer thinks the sensor 2 and sensor 3 oxygen sensors on bank 1 are plugged into each other's connectors. This usually happens after one is replaced.
Can I drive with code P2416?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P2416?
Common possibilities to test include: oxygen sensor connectors swapped; wiring crossed during a repair; wrong sensor installed. A shop should confirm the cause before replacing parts.