Home › Code lookup › P2421
Powertrain code · Emissions

P2421 Evaporative Emission System Vent Valve Stuck Open

How urgent? Book a check when convenient

What it means

The EVAP vent valve, which seals the fuel vapor system during leak tests, seems stuck open. The system can't seal and test itself.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Command the vent valve closed with a scan tool and check that it seals
  2. Inspect the valve and its filter for dirt or spider webs

Signs you may notice

  • Check engine light on
  • Usually no change in how the car drives
  • May fail an emissions inspection

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailed EVAP vent valve
  • CommonDirt or debris holding the vent valve open
  • PossibleWiring or connector problem
  • PossibleEngine computer problem (rare)

Typical repair once the cause is confirmed

Replace the vent valve and clean or replace a clogged vent filter.

Repair costInsufficient verified pricing for this vehicle and repair
Replace EVAP vent valve. Prepare an itemized shop request.
Walk through it step by step: Check engine light on →

Common questions

What does P2421 mean?

The EVAP vent valve, which seals the fuel vapor system during leak tests, seems stuck open. The system can't seal and test itself.

Can I drive with code P2421?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P2421?

Common possibilities to test include: failed evap vent valve; dirt or debris holding the vent valve open; wiring or connector problem; engine computer problem (rare). A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.