Home › Code lookup › P2422
Powertrain code · Emissions

P2422 Evaporative Emission System Vent Valve Stuck Closed

How urgent? Book a check when convenient

What it means

The EVAP vent valve seems stuck closed, so the fuel vapor system can't breathe. You may notice trouble filling up the tank.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect the vent line and filter for dirt, mud or insect nests
  2. Command the vent valve open and closed with a scan tool
  3. Check if the fuel tank holds pressure or vacuum it shouldn't

Signs you may notice

  • Check engine light on
  • Fuel pump nozzle clicks off early when filling
  • Possible whoosh of air when opening the fuel cap
  • Usually no change in how the car drives

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailed EVAP vent valve
  • CommonClogged vent valve filter or vent line (dirt, mud or spider webs)
  • PossibleBlocked charcoal canister
  • PossibleWiring or connector problem

Typical repair once the cause is confirmed

Clear any blockage and replace the vent valve or canister if needed.

Repair costInsufficient verified pricing for this vehicle and repair
Replace EVAP vent valve. Prepare an itemized shop request.

Known on these vehicles

Walk through it step by step: Check engine light on →

Common questions

What does P2422 mean?

The EVAP vent valve seems stuck closed, so the fuel vapor system can't breathe. You may notice trouble filling up the tank.

Can I drive with code P2422?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P2422?

Common possibilities to test include: failed evap vent valve; clogged vent valve filter or vent line (dirt, mud or spider webs); blocked charcoal canister; wiring or connector problem. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.